True Wilderness Logo

AquaPod Kit Emergency Water Storage

$28.99
Availability: Out of Stock

AquaPod Kit Emergency Water Storage
Move your mouse over image or click to enlarge

Details

A simple, safe solution when emergencies strike, the AquaPodKit allows you to store up to 65 gallons of fresh water using an ordinary household bathtub. AquaPodKit is the easy way to store temporary water when the need arises. As everyone learned in recent hurricane disasters, municipal fresh water service is not absolutely assured. Don’t be without it. Next time, don’t rush to the store in hopes of buying bottled water. Buy an AquaPodKit now—and relax knowing that you’re prepared for the next time.

  • Fits almost any tub and holds up to 65 gallons of water
  • The AquaPodKit is easy to use with your existing bathtub
  • 14 day supply of water for basic needs for a family of four
  • Costs much less than a 65 gallons of bottled water
  • AquaPodKit is the only bathtub bladder that offers refills


INSTRUCTIONS FOR USE:

1. Place liner in tub with liner neck positioned near tub spout. Secure the liner neck to the tub spout with one of the enclosed tie clamps.
2. The tub liner can be filled to within a couple of inches of the tub’s top rim. DO NOT OVER FILL.
3. Pull liner neck through inner sleeve.
4. Pull and fold liner over top part of inner sleeve (see printed PDF of instructions).
5. Push outer sleeve over the liner that is wrapped over the inner sleeve.
6. Place sleeve cap over outer sleeve and snap into place.
7. Insert the pump siphon tube into the sleeve cap.
8. Snap pump siphon tube into sleeve cap so it fits evenly and tight. Make sure that the sleeve cap is on securely.
9. Place cork (discharge tube stopper) in to the discharge tube. At this point the water is stored.
10. To dispense the stored water, remove cork and place the discharge tube into a container. Turn top knob to the on position. Begin pumping the water by squeezing the pump bulb. Place cork in discharge tube to store for next usage.

 

FREQUENTLY ASKED QUESTIONS
Q: Where are the liners made?
A: AquaPodKit® manufactures their liners here in the USA! (a dying breed)

Q: What are the liners made of?
A: The AquaPodKit® liners are constructed of 4 mil food grade Linear Low Density Polyethylene (LLDPE) plastic. This material follows and stays within USDA and FDA guidelines. Contains no PVCs and is BPA free.

Q: How much water does the AquaPodKit hold?
A: The standard tub holds 70 gallons of water, and to be safe, we recommend filling the tub with 65 gallons to come in under the tub line. It is not recommended to put 100 gallons in a standard tub. The liner is 40″x80″ and, depending on the size of your bathtub, can hold up to 100 gallons.

Q: What is the size of the liner?
A: It is 40″x80″

Q: How long can I store water in the AquaPodKit?
A: The water will stay fresh for up to 8 weeks, depending on humidity and temperature conditions.

Q: How long does it takes to fill the AquaPodKit?
A: This depends on your home’s water flow, but usually around 10 to 15 minutes.

Q: How do I get the water out of the AquaPodKit?
A: Included in the package is a siphon pump and lock that easily assembles, so you can dispense the water into a pitcher or jug.